Installing the lane change warning sensor at the front

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: TECHNICAL INFORMATION
Detents, guides and mounting elements must not be damaged or missing.

NOTE: Description is for left component only. Procedure on the right side is identical.

NOTE: To provide a better overview: Schematic diagram with partially hidden components.

Push the lane change warning sensor (2) into the bracket (3) in arrow direction up to the stop.
Lock the lock (1).
Ensure that the lock (1) is locked correctly.

Courtesy of BMW OF NORTH AMERICA, INC.
Connect the connector (1) to the sensor (2) and lock it.

Courtesy of BMW OF NORTH AMERICA, INC.
Correctly position the wheel arch trim panel (1).
Tighten all bolts (arrows).

TIGHTENING TORQUES SPECIFICATION

Wheel arch cover
screw	Tightening Torque	3 Nm
Plastic nut	Tightening Torque	2.6 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work

Refer to ADDITIONAL WORK AFTER THE INSTALLATION/REPLACEMENT .