Install Hood

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: RISK OF DAMAGE
Mechanical effects.
Paint damage.

Mask those working areas at risk with yellow plastic adhesive tape.
Remove and install heavy or bulky components with the aid of another person/other persons.

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Perform the steps on the right and left side.

Position the hood on the hinge.
Support the hood.

Tighten nuts (2) and (3).

TIGHTENING TORQUE SPECIFICATIONS

Hood to the hinge
Nut M8	Tightening torque	19 Nm

Install the protective cap (1).

Follow-up work

Refer to INSTALLING THE NOZZLE CHAIN .
Refer to DISCONNECTING ALL BATTERY GROUND LEADS .