Installing The Front Holder

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.

Position holder (1).
Renew screws (2).
Parts: Screws

Tighten down screws (2).

TIGHTENING TORQUE SPECIFICATIONS

Side panel holder to body
Screw M6 Renew screw.	Tightening torque	8 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Remount sheet metal nuts (3).
Fasten wiring harness (2) at attachment points (arrows).
Connect connectors (1) and lock.

Courtesy of BMW OF NORTH AMERICA, INC.