Fix Bolt On New Part Rep-Rep-RAGRP41-4105_BOLZEN - V.4

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: On BMW and MINI bodies, various welded and pushed in bolts are being used.

Single ball/double ball (version 1):

Grind off any residues of the single ball (1), if applicable.

Drill hole with diameter 7 mm.

G10141625

Courtesy of BMW OF NORTH AMERICA, INC.

Set blind rivet nut (1).

Screw in single ball with thread until a height of 5 mm (double ball 10 mm) is reached.

G10141626

Courtesy of BMW OF NORTH AMERICA, INC.

Single ball/double ball (version 2):

Grind off any residues of the single ball (1), if applicable.

Clean area with solvent cleaner R1.

G10141625

Courtesy of BMW OF NORTH AMERICA, INC.

Clean bonding surface of repair element single ball (1) with solvent cleaner R1.

Bond repair element optionally with adhesive K1, K5 or window pane adhesive at the same position.

G10141628

Courtesy of BMW OF NORTH AMERICA, INC.

Coarse threaded bolt (version 1):

Grind off any residues of the coarse threaded bolt (1), if applicable.

G10141629

Courtesy of BMW OF NORTH AMERICA, INC.

Spot weld coarse threaded bolt to same position.

G10141630

Courtesy of BMW OF NORTH AMERICA, INC.

Coarse threaded bolt (version 2):

Grind off any residues of the coarse threaded bolt (1), if applicable.

Drill hole with diameter 7 mm.

Set blind rivet coarse threaded bolt using riveting pliers.

G10141629

Courtesy of BMW OF NORTH AMERICA, INC.