US version: Check/replace the horizontal blocking sets for the headlights (M5 2018-2022)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Before installing the new headlight, make sure that the adjustment screw for adjusting the headlight horizontally is secured with a plug to prevent it from being manipulated.

Check:

Check the adjustment screw for horizontal adjustment for blockage (schematic illustration. If necessary, consult the vehicle specific manufacture's information on headlight adjustment for the exact positioning of the adjustment screws.)

Courtesy of BMW OF NORTH AMERICA, INC.

Desired state:

The adjustment screw for horizontal adjustment must be blocked with a plug (1) (schematic illustration)

Result:

The plug (1) is installed in the adjustment screw for horizontal adjustment (schematic illustration)

Measure:

Install headlight

After installation, check the vertical headlight adjustment and correct if necessary.

Courtesy of BMW OF NORTH AMERICA, INC.

Result:

No plug is installed in the adjustment screw (1) for horizontal adjustment (schematic illustration)

Courtesy of BMW OF NORTH AMERICA, INC.

Measure:

Mark the position the adjustment screw for horizontal adjustment to identify possible shifting of the adjustment screw after installation of the horizontal blocking (schematic illustration).

Courtesy of BMW OF NORTH AMERICA, INC.

Push the headlight-specific plug (1) without damaging it into the adjustment screw (2) (schematic illustration).

NOTE: After installing the plug (1), check the correct position of the adjusting screw (2) based on the marks made previously and correct if necessary.

Courtesy of BMW OF NORTH AMERICA, INC.

Install headlight

After installation, check the vertical headlight adjustment and correct if necessary.