Install headlight
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
Checking blocking of the horizontal setting
- See ADDITIONAL INFORMATION .
- Feed in and correctly position the headlight (3).
- Tighten down screws (1) and (2).
TIGHTENING TORQUES SPECIFICATION
| Front light combination, top | ||
|---|---|---|
| Screw | Tightening Torque | 8 Nm |
- Tighten down screws (2).
TIGHTENING TORQUES SPECIFICATION
| Front light combination, bottom | ||
|---|---|---|
| Screw | Tightening Torque | 5 Nm |
TIGHTENING TORQUES SPECIFICATION
| Support to support | ||
|---|---|---|
| Hexagon screw M6x20 |
Tightening Torque | 8 Nm |
- Remove the adhesive tape in area (1).