Install thrust arm
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
- Replace screws (1) and (2).
Parts: Screws
- Position thrust arm (3).
- Tighten down screws (1) and (2) hand force.
- Tighten down screw (2).
TIGHTENING TORQUE SPECIFICATIONS
| Rear axle carrier to body | ||
| M14 Replace screw. | tightening torque | 185 Nm |
- Tighten down screws (1).
TIGHTENING TORQUE SPECIFICATIONS
| Thrust arm on body | ||
| M10 Replace screws. | Joining torque Angle of rotation |
56 Nm 45° |
Follow-up work
- Refer to INSTALLING THE REINFORCEMENT STRUT .
- Refer to INSTALLING THE UNDERSHIELD ON THE LEFT FUEL TANK .
- Refer to INSTALLING UNDERSHIELD ON THE FUEL TANK ON THE RIGHT .