Install ride height sensor, front

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Schematic diagram is for example purposes. Some parts may differ in certain details.

Attach connector (2) at ride height sensor (1) and lock.
Secure the wiring harness (3) on the holder of the ride height sensor.

Courtesy of BMW OF NORTH AMERICA, INC.
Position ride height sensor (1) on the body.

Tighten down screw (2).

TIGHTENING TORQUE SPECIFICATIONS

Holder, ride height sensor, at the body
M6	tightening torque	8 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Position jointed rod (2) on upper wishbone.
Tighten nut (1).

TIGHTENING TORQUE SPECIFICATIONS

Jointed rod ride height sensor on wishbone
M6	tightening torque	8 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work

Refer to INSTALLING FRONT LEFT OR RIGHT WHEEL .
Refer to CARRYING OUT RIDE HEIGHT ADJUSTMENT .
Refer to RESETTING THE TIRE PRESSURE MONITOR .
Refer to ADJUSTING HEADLIGHTS .