Replacing the foam seat on the rear seat
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
Preliminary work
- Refer to REMOVING REAR SEAT BENCH .
- Refer to REMOVING ALL THE ISOFIX TRIMS .
- Refer to REMOVING THE SEAT SURFACE COVER FOR THE REAR SEAT .
NOTE:
Schematic diagram is for example purposes. Some parts may differ in certain details.
- Replace the foam seat on the rear seat.
Parts: Foam cushion
Replacing heating mats of rear seat (SA4HA)
NOTE:
TECHNICAL INFORMATION
The heating mat is glued to the foam pad and cannot be dismantled non-destructively.
When replacing the heating mat, a new one must always be installed with a new foam pad.
The heating mat is glued to the foam pad and cannot be dismantled non-destructively.
When replacing the heating mat, a new one must always be installed with a new foam pad.
NOTE:
Schematic diagram is for example purposes. Some parts may differ in certain details.
- Replace the heating mats (1).
Parts: Heating mats
- Position the heating mats (1) on the new foam cushion (2) and align them.
- Bond heating mats (1) with the new foam cushion (2).
Follow-up work
- Refer to INSTALLING THE SEAT SURFACE COVER FOR THE REAR SEAT BENCH .
- Refer to INSTALLING ALL ISOFIX TRIMS .
- Refer to INSTALLING THE REAR SEAT BENCH .