Removing the backrest covering (M CFRP bucket seat)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
Preliminary work
- Refer to REMOVING DRIVER'S SEAT .
- Refer to REMOVING OUTER COVER ON FRONT SEAT .
- Refer to REMOVING INNER COVER FROM THE FRONT SEAT .
- Refer to REMOVING THE INSERTING OF THE HEAD RESTRAINT (M CFRP BUCKET SEAT) .
- Refer to REMOVING THE EMBLEM FROM THE BACKREST OF THE FRONT SEAT (M CFRP BUCKET SEAT) .
- Refer to REMOVING THE FRONT APERTURE TRIM (M CFRP BUCKET SEAT) .
- Refer to REMOVING THE REAR APERTURE TRIM (M CFRP BUCKET SEAT) .
- Refer to REMOVING THE BACKREST COVERING WITH THE CUSHION (M CFRP BUCKET SEAT) .
NOTE:
RISK OF DAMAGE
Careless handling of tools and sharp-edged components .
Scratches, surface damage .
Careless handling of tools and sharp-edged components .
Scratches, surface damage .
- Protect working area.
- Handle tools and components carefully.
- Unclip the backrest covering (1) in the marked areas from the foam cushion (2)
- Disconnect and remove the backrest covering (1) from the heating element (2) and the foam rubber padding (3).