LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2025 >> 230i >> Repair and Diagnosis >> External Pages >> Different car >> Section 206 (General Electrical System -- Repair M5 (F90)) >> 61 35 Control Units, Modules >> Notes on ESD protection (Electro Static Discharge) (M5 2018-2022)

Notes on ESD protection (Electro Static Discharge) (M5 2018-2022)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required: 

NOTE: Electrical components which are particularly sensitive to electrostatic discharge (electronic control units, sensors, etc.) are marked with the ESD warning symbol.
-Electro
-Static
-Discharge

Attention! 

Refer to SERVICE INFORMATION .

Statically charged persons can discharge themselves when they tap electrical components.

NOTE: Humans can only detect a discharge starting from a level of approx. 3000 V.
The danger threshold for electrical components already starts from a level of approx. 100 V.
G04727627Courtesy of BMW OF NORTH AMERICA, INC.

Example:

Mechatronics control unit.

G04727628Courtesy of BMW OF NORTH AMERICA, INC.
G04727629Courtesy of BMW OF NORTH AMERICA, INC.

Attention!

Do not tap pins and multi-pin connectors directly! 

Only tap the housings of electrical components.

Attention! 

To avoid damaging or destroying electrical components as a result of electrostatic discharge, it is absolutely essential to observe the following instructions:

Personal protective equipment: 

Electrically conducting clothing (high wool content, antistatic shoes required).

These can primarily be identified by the logo on the side.

G05780043Courtesy of BMW OF NORTH AMERICA, INC.