Install brake light switch

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.

Clip the holder for the brake light switch (3) into the brake pedal.
Press brake pedal.
Push the brake light switch (2) in the opposite direction to the arrow into the holder for the brake light switch (3) up to the stop.
Counter support the holder for the brake light switch (3) and move back the brake pedal slowly to the initial position at the same time.
Slowly pull brake pedal back to stop.
Connect connector (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work

Refer to INSTALLING THE TRIM PANEL FOR THE PEDAL ASSEMBLY .