Socket housings, 5-pin, 8-pin, System MQS/MPQ (M5 2018-2022)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
Manufactured by AMP: The following contact types without single conductor seal can be fitted in the connector housings:
- MQS (Micro Quadlock System)
- MPQ, width 2.8 mm (Micro Power Quadlock)
- MPQ, width 5.2 mm (Micro Power Quadlock)
Socket housing, 5-pin (Hybrid System MQS/MPQ)
Raise fastener (1) over snap-in lug (2) and detach from contact carrier (3).
Socket housing, 8-pin (MQS):
Raise fastener (1) over snap-in lug (2) and detach from contact carrier (3).
Hold down snap-in hooks (1) of contact and pull cable with contact as far as secondary lock (2).
Hold down snap-in hooks in secondary lock (1) again and pull cable with contact (2) completely out of contact carrier (3).