In-line connectors, 24-/44-pin, Hybrid System MQS/MPQ (M5 2018-2022)

Manufactured by AMP:  The following contact types without single conductor seal can be fitted in the connector housings:

• MQS (Micro Quadlock System)
• MPQ, width 2.8 mm (Micro Power Quadlock)
• MPQ, width 5.2 mm (Micro Power Quadlock)

Socket housing: 

Press locks (1) on protective cap (2) upwards on both sides.

Detach protective cap from contact carrier (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Hold down safety catch (1) of contact bushing in opening of contact carrier with a small screwdriver.

Pull wire with contact bushing in arrow direction as far as secondary lock (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Hold down snap-in hooks in secondary lock (1) again and pull cable with contact bushing (2) completely out of contact carrier (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Pin housing: 

Press locks (1) on protective cap (2) upwards on both sides.

Detach protective cap from housing carrier (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Pull contact carrier (1) out of housing carrier (2).

The pin contacts are pulled out of a contact carrier as described under "Socket housing".

Courtesy of BMW OF NORTH AMERICA, INC.