Replacing exhaust turbocharger
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
- Loosen screws (1)
.
- Loosen screws (1) .
- Remove the lines (1) .
- Replace the right exhaust turbocharger.
Parts: Exhaust turbocharger
- Position the lines (1) on the exhaust turbocharger.
- Replace sealing rings.
Parts: Sealing ring
- Position screws (1) with sealing rings on the lines.
- Tighten down screws (1) .
TIGHTENING TORQUE SPECIFICATIONS
| Coolant lines on exhaust turbocharger | ||
|---|---|---|
| Screw M14x1.5 | Tightening torque | 15 Nm |
| Angle of rotation | 75° | |