Contact Ring: Installation
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2002 BMW Z3, 2002 BMW M3, 2002 BMW M Roadster, 2002 BMW M Coupe, and 2002 BMW 330xi. However, it is still accessible from the selected car via links, so may be relevant.
- To install, reverse removal procedure. If installing original contact ring, center contact ring before installation. See CONTACT RING under ADJUSTMENTS. If installing NEW contact ring, NEW contact ring is held in center position with shipping lock pin. DO NOT remove lock pin until contact ring is attached to steering wheel.
- Install contact ring and reinstall screws holding ring to wheel hub. Pinch ends of locking pin with a pliers and remove. Activate air bag system. See DISABLING & ACTIVATING AIR BAG SYSTEM .