Replacing the engagement solenoid switch (M5 2018-2022)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
Preliminary work needed:
- Switch off ignition.
- Remove STARTER MOTOR .
Slacken nut (1).
Remove cable head (2).
IMPORTANT:
Do not twist cable head (2) when tightening, risk of short circuit to starter motor housing.
Tightening torque 12 41 1AZ .
Unscrew the screws (1).
Remove the solenoid switch (1) and the spring (2).
Detach the bolt (3).
Installation note:
Check the bolt (3) for wear and grease the bolt.