Reading adjustment values during replacement of engine control units
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
TECHNICAL INFORMATION
If the DDE control unit or an injector has been replaced, it will also be necessary to carry out injection quantity compensation. The adjustment value for the injection quantity compensation is printed on each injector. The adjustment value must be read off before installation.
If the DDE control unit or an injector has been replaced, it will also be necessary to carry out injection quantity compensation. The adjustment value for the injection quantity compensation is printed on each injector. The adjustment value must be read off before installation.
- Read adjustment value at the injectors (1) and note according to cylinder.