Installing the front wheel speed sensor

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.

Clean bore for wheel RPM sensor and grease using lubricating grease (see applicable BMW parts catalogue).

CONSUMABLE SPECIFICATION

Lubricating grease Staburags NBU 12K

100 g, Tube

83 23 9 407 810

Courtesy of BMW OF NORTH AMERICA, INC.

Install rear wheel speed sensor.
Position and tighten the screw (2).

TIGHTENING TORQUES SPECIFICATION

Front wheel speed sensor on swivel bearing
Screw Replace screw.	Tightening torque	12 Nm

Connect the cable of the wheel RPM sensor in the holders (1).
Connect the cable of the wheel RPM sensor in the holders (1).
Connect plug connection and close housing cover (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work

Refer to ATTACHING THE FRONT LEFT WHEEL .