Install the optional equipment system (SAS)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.

Connect connector (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Feed in the optional equipment system (SAS) (3).
Replace the plastic nuts (1) and (2).
Parts: Plastic nuts
Install the nuts (1) and (2) and tighten.

TIGHTENING TORQUES SPECIFICATION

Optional equipment system (SAS) to body
Replace plastic nut.	4 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work

Refer to INSTALLING THE SIDE TRIM PANEL IN THE FOOTWELL AT THE LEFT A-PILLAR .
Refer to INSTALLING THE TRIM PANEL FOR THE PEDAL ASSEMBLY .
Refer to INSTALLING THE FRONT DOOR SILL COVER STRIP .