Tighten the left front-end strut
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
RISK OF DAMAGE
Use of an incorrect tool (impact screwdriver) to release and tighten the screws.
Damaged thread.
Use of an incorrect tool (impact screwdriver) to release and tighten the screws.
Damaged thread.
- Only use a standard tool (e.g. reversible ratchet) to release/tighten the screws.
- Clean the thread at shock tower.
- Replace the screw (1)
.
Parts: Screw
Tighten the bolt (1) of the strut brace (3) .
TIGHTENING TORQUES SPECIFICATIONFront-end strut, front screw
Joining torque 28 Nm Angle of rotation 90° - Replace the screw (2)
.
Parts: Screw Tighten the bolt (2) of the strut brace (3) .
TIGHTENING TORQUES SPECIFICATIONFront-end strut, rear screw
Joining torque 56 Nm Angle of rotation 90° - Repair the damaged thread on the shock tower with a Helicoil insert.
CONSUMABLE SPECIFICATION
| Helicoil thread insert | |
| M10x30 mm | 07129909659 |