Secure the wiring harness for the EPS on the front axle support
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
TECHNICAL INFORMATION
Different variants may be installed depending on the vehicle equipment.
Different variants may be installed depending on the vehicle equipment.
Version A: Secure wiring harness
- Position wiring harness.
- Secure wiring harness in the areas (3) .
- Secure the wiring harness in the areas (2) on the front subframe.
- Connect connectors (1) and lock.
Version B: Secure wiring harness
- Position wiring harness (1) .
- Secure wiring harness (1) in the areas (2)
.
- Connect the wiring harness (3) to the retaining bracket.
- Secure the wiring harness in the areas (2) on the front subframe.
- Connect connectors (1) and lock.