Removing both track end rods

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.

Removing the tie rod end

Unfasten nut (1) .
NOTE: If necessary, counter-hold at the Torx socket.
Release the tie rod end (2) from the swivel bearing.

Courtesy of BMW OF NORTH AMERICA, INC.
Determine dimension (A) to simplify the following toe adjustment on the front axle.
Slacken screw (1) .
Unscrew tie rod end.
NOTE: If necessary, hold the track rod with an open-end spanner for counter support.

Courtesy of BMW OF NORTH AMERICA, INC.