Releasing brake caliper rear left and right
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
TECHNICAL INFORMATION
Work on the carbon-ceramic brake disc may be performed exclusively by specially trained service personnel.
The service personnel must have received the proper training.
Work on the carbon-ceramic brake disc may be performed exclusively by specially trained service personnel.
The service personnel must have received the proper training.
NOTE:
TECHNICAL INFORMATION
Carbon-ceramic brake discs may not be modified/manipulated.
Retightening or disassembling brake components is not permitted.
Bore holes may not be mechanically processed. Counter-boring is not permitted.
Carbon-ceramic brake discs may not be modified/manipulated.
Retightening or disassembling brake components is not permitted.
Bore holes may not be mechanically processed. Counter-boring is not permitted.
NOTE:
TECHNICAL INFORMATION
Brake cleaner may not be used.
Brake cleaner may not be used.
NOTE:
Description is for left component only. Procedure on the right side is identical.
- For vehicles with carbon ceramic brakes: Be sure to follow the instructions.
Releasing the rear brake caliper
- Release the brake hose (1) from the holder (2) .
- Loosen screws (3) .
- Detach the brake caliper (4)
in the direction of the arrow.
Do not hang the brake caliper from the brake hose.
- Tie up the brake caliper (1) with the special tool 2 413 317 .