Installing the wiring harness (M Sport steering wheel)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
- Position the plug connection (4) and the control unit for the steering wheel electronics (3) in the steering wheel.
- Route the wiring harness in the steering wheel according to the illustration.
- Connect the grounding cable to the impact plate.
- Connect connectors (2) and lock.
- If installed:
Connect connectors (5) and lock.
- Position the grounding cable and tighten the screw (1) .
TIGHTENING TORQUES SPECIFICATION
| Grounding cable to steering wheel | ||
| Screw | tightening torque | 2 Nm |