For equipment with external radiator or stationary heating system: Remove front bumper cover
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
Removing front bumper cover
NOTE:
Schematic diagram is for example purposes. Some parts may differ in certain details.
- Loosen screws (1).NOTE: Description is for left component only. Procedure on the right side is identical.
- Loosen screws (1).
- Unlock plug connection (1) on the right and disconnect.
- Detach plug connector (1) from holder (2).
- Unlock and disconnect the hose for the headlight cleaning system.
- Lay hose at the top and fix in place.
This prevents washer fluid from being emitted.
- Undo the bumper cover (1) in the area of the active air-flap control (2) from the attachments.
- Pull bumper cover (1) forward slightly and, if necessary, unlock and disconnect additional plug connections.
- Remove bumper cover (1) towards front.