For equipment with external radiator or stationary heating system: Install bumper cover, front

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.

Install bumper cover, front

NOTE: Schematic diagram is for example purposes. Some parts may differ in certain details.

Install the bumper cover (1).
Engage the bumper cover (1) in the area of the upper active air-flap control (2) in the mountings.

Courtesy of BMW OF NORTH AMERICA, INC.
Connect connector (1) on the right side and lock it.
Attach plug connection (1) in holder (2).
Connect the hose for the headlight cleaning system.

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Description is for left component only. Procedure on the right side is identical.

Tighten down screws (1).

TIGHTENING TORQUES SPECIFICATION

Bumper cover on side wall
Screw	Tightening torque	3 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten down screws (1).

TIGHTENING TORQUES SPECIFICATION

Underbody protection
screw	Tightening torque	3 Nm

Courtesy of BMW OF NORTH AMERICA, INC.