Fitting the seat cover with the cushion for the front seat

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.

Place the seat cover (1) with the upholstery onto the seat mechanism.
If necessary, insert the associated wiring harness.
Attach the edge stripping to the seat mechanism in arrow direction.

Courtesy of BMW OF NORTH AMERICA, INC.
Attach the seat cover (1) in the highlighted area.

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: For a better overview the removed condition is shown here.
Insert the support for the thigh support correctly into the guide in arrow direction and lock it.

Courtesy of BMW OF NORTH AMERICA, INC.
Attach the trim (1) from the bottom and clip in using the clamps (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Attach the clips (1) the left and right.

Courtesy of BMW OF NORTH AMERICA, INC.
Attach the clip (1) the left and right.

Courtesy of BMW OF NORTH AMERICA, INC.
Insert the seat cover (1) between the backrest and the seat surface.
Attach the seat cover (1) in the highlighted area.

Courtesy of BMW OF NORTH AMERICA, INC.
Insert the wiring harness into the seat mechanism.
Connect connectors (1) and lock.

Courtesy of BMW OF NORTH AMERICA, INC.