Connect the refrigerant line to the expansion valve
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
- Protect the oxygen sensor cable (1) from mechanical damage.
- Replace O-rings.
Parts: O-rings
- Correctly position the refrigerant line (3) .
- Engage hose support (4) .
- Tighten nut (2)
.TIGHTENING TORQUES SPECIFICATION
Refrigerant line to expansion valve/connecting piece M6 tightening torque 13 Nm - On version A:
Position the holder (1) correctly at the refrigerant line (2) and close.
- On version B:
Close the holder (1) on the refrigerant line (2) .