Checking the camber
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
Check
- Check camber with wheel alignment.
Desired state
- Camber within the tolerance.
Result
Camber below the tolerance.
Measure
- Replace the upper wishbone with an upper wishbone that is more positive than the previously installed upper wishbone.
Check
- Check camber with wheel alignment.
Result
Camber above the tolerance.
Measure
- Replace the upper wishbone with an upper wishbone that is more negative than the previously installed upper wishbone.