Remove front axle completely
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
- Lower the front axle support (1) by dimension (A) .
Dimension (A) = maximum 10 cm
NOTE:
TECHNICAL INFORMATION
Secure component against falling.
Secure component against falling.
- Release the screws (1) on the engine oil cooler (2) on the left and right.
- Position engine oil cooler (1) behind the front axle support (2) .
- Completely lower and remove front axle carefully.
- Position the engine oil cooler (2) .
- Screw in the screws (1) by a few turns.