Installing the mount of the hood seal

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Description is for left component only. Procedure on the right side is identical.

Feed in the mount (4) of the hood seal.
Make sure that the mount for the hood seal (4) is correctly fitted on all adjoining components.
Only on right side: Clip in cable (3).
Clip in clips (2).
Mount the expanding rivets (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work

Refer to INSTALLING THE LID FOR THE WASHER FLUID RESERVOIR .
Refer to INSTALLING THE REAR RIGHT ENGINE COMPARTMENT COVER .
Refer to INSTALLING THE COVER IN THE ENGINE COMPARTMENT ON THE RIGHT .