US version only: Remove the bottom holder from the coolant radiator at left and right

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Perform the steps on the right and left side.

NOTE: Description is for left component only. Procedure on the right side is identical.

Remove the front section of the front wheel arch cover

NOTE: To provide a better overview: Schematic diagram with partially hidden components.

Remove screws (arrows).
Guide out the front section (1) of the front wheel arch cover.

Courtesy of BMW OF NORTH AMERICA, INC.

Loosen screws (1) .
Remove the bottom holder (2) .

Courtesy of BMW OF NORTH AMERICA, INC.
Fasten the external radiator (1) with a luggage strap 0 496 080 (33 5 206) on the top holder (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Position the deformation element (1) .
The screw (2) must be screwed in again several turns.

Courtesy of BMW OF NORTH AMERICA, INC.