Shifting vehicle into design position
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
- Lay weights in the area of the spring strut until the vehicle ride height is within the tolerance!TECHNICAL DATA SPECIFICATION
Tolerance for ride height at design level Tolerance for setpoint value max. 2 mm Difference between left and right max. 2 mm - Measuring vehicle ride height (A) : (1) Attach the tape measure to the bottom rim flange (2) and measure the distance to the lower wheel arch edge.