Securing the tie rod on the left and right of the swivel bearing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Perform the steps on the right and left side.
- Position the tie rod (2)
on the swivel bearing.
- Replace nut (1)
.
Parts:
Nut
- Tighten nut (1)
.
NOTE:
Counter-hold at the Torx socket.
TIGHTENING TORQUES SPECIFICATION
| Tie rod end to swivel bearing |
M14
Replace nut. |
Tightening torque |
165 Nm |
 Courtesy of BMW OF NORTH AMERICA, INC.
|