Securing the tie rod end on the swivel bearing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.

Position the tie rod end (2) on the swivel bearing.
Replace nut (1) .
Parts: Nut
Tighten nut (1) .
NOTE: Counter-hold at the Torx socket.

Courtesy of BMW OF NORTH AMERICA, INC.

TIGHTENING TORQUES SPECIFICATION

Tie rod end to swivel bearing
M14 Replace nut.	Tightening torque	165 Nm