Securing the spring strut holder on the wishbone

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: TECHNICAL INFORMATION
Tighten the screw connection in the NORMAL POSITION .

Position spring strut holder on wishbone.
Replace screw (2) and nut (1) .
Parts: Bolt, nut

Courtesy of BMW OF NORTH AMERICA, INC.
Install the bolt (2) .
Tighten nut (1) in the NORMAL POSITION .

TIGHTENING TORQUES SPECIFICATION

Bottom wishbone on spring strut holder
M14 Replace screw and nut. Tighten screw connection in normal position!	Joining torque	165 Nm
	Angle of rotation	90°