Securing the brake caliper

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.

Release the special tool 2 413 317 from the brake caliper (1) and remove.

Courtesy of BMW OF NORTH AMERICA, INC.
Position the brake caliper and slide onto the stud bolts.
Replace the nuts (1) .
Parts: Nuts

Tighten nuts (1) .

Courtesy of BMW OF NORTH AMERICA, INC.

TIGHTENING TORQUES SPECIFICATION

Brake caliper on stud bolt of the front swivel bearing
M12 Replace nuts.	Tightening torque	95 Nm

Secure the brake hose on the holders (1) .
NOTE: Only perform the operation on the left side.
Attach the cable for the brake pad wear sensor to the holders (2) .

Courtesy of BMW OF NORTH AMERICA, INC.