Securing the bottom wishbone on the left and right to the front subframe

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Perform the steps on the right and left side.

NOTE: TECHNICAL INFORMATION
Tighten the screw connection in the NORMAL POSITION .

Position the wishbone at the bottom of the front subframe.

Courtesy of BMW OF NORTH AMERICA, INC.
Replace screw (2) and nut (1) .
Parts: Bolt, nut
Tighten the nut (1) in the NORMAL POSITION .

TIGHTENING TORQUES SPECIFICATION

Lower wishbone to front axle carrier
M14 Replace screw and nut. Tighten in normal position.	Joining torque	85 Nm
	Angle of rotation	180°