Install the reinforcement strut on the right engine mount
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Only perform the operation on the right side.
- Position the reinforcement strut (1) .
- Screw in the screw (2)
by hand force.
- Tighten down screw (1)
.TIGHTENING TORQUES SPECIFICATION
Engine mount reinforcement strut on body M8 tightening torque 28 Nm - Tighten the screw (2) at the reinforcement strut (1) .
TIGHTENING TORQUES SPECIFICATION
| Engine mount reinforcement strut on front front subframe | ||
| M8 | tightening torque | 28 Nm |