Install the holder on the swivel bearing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
- Position holder (4) on the swivel bearing.
- Tighten down screws (3)
.TIGHTENING TORQUES SPECIFICATION
Standard screw connection M6 M6 Tightening torque 8 Nm - Position holder (2) on the swivel bearing.
- Tighten down screws (1) .
TIGHTENING TORQUES SPECIFICATION
| Standard screw connection M6 | ||
| M6 | Tightening torque | 8 Nm |