Fasten the front wheel speed sensor

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.

Grease the hole for the wheel speed sensor with lubricating grease (see applicable BMW parts catalogue).
Position wheel speed sensor (2) .
Replace the screw (1) .
Parts: Screw

Tighten down screw (1) .

TIGHTENING TORQUES SPECIFICATION

Wheel RPM sensor to swivel bearing
M6 Replace screw.	Tightening torque	12 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Secure the cable of the wheel speed sensors on the brackets (3) .