Checking the tire settings in the CID (only in versions with a Tire Pressure Monitor SA2VB)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
Check
- Check for correct tire setting in the central information display (CID).
Desired state
- The mounted tires match the tire setting in the central information display (CID).
Result
» Incorrect tire setting in the central information display (CID).
Measure
- Adjust the tire setting in the central information display (CID).
Open the menu:
- Select My vehicle in the menu.
- Select Vehicle status in the menu.
- Select Tire pressure monitor (RDC) from the menu.
Enter the settings:
- Select Tire settings from the menu.
- Select tires: Summer tires/winter tires.
- Select the tire type that is mounted at the rear axle.
- Select the load status of the vehicle.
- Confirm the settings.
Starting measurement of the current tire pressure. The progress of the measurement is displayed.