Attaching the thermostat or transmission oil cooler line on the front subframe
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
TECHNICAL INFORMATION
Different variants may be installed depending on the vehicle equipment.
Different variants may be installed depending on the vehicle equipment.
Version A: Attaching the thermostat or transmission oil cooler line on the front subframe
- Attach the thermostat (1) for the transmission oil cooling on the holder (2) .
Version B: Attaching the thermostat or transmission oil cooler line on the front subframe
- Position the holder (2) for the transmission oil cooler lines on the front subframe.
- Tighten down screw (1)
.TIGHTENING TORQUES SPECIFICATION
Holder for transmission oil cooler lines on front subframe M6 tightening torque 8 Nm - Position the holder (2) for the transmission oil cooler lines on the front subframe.
- Tighten down screw (1) .
TIGHTENING TORQUES SPECIFICATION
| Holder for transmission oil cooler lines on front subframe | ||
| M6 | tightening torque | 8 Nm |