Contact Ring: Installation
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2001 BMW Z3, 2001 BMW M3, 2001 BMW M Roadster, 2001 BMW M Coupe, and 2001 BMW 330xi. However, it is still accessible from the selected car via links, so may be relevant.
- To install, reverse removal procedure. If installing original contact ring, center contact ring before installation. See CONTACT RING under ADJUSTMENTS. If installing NEW contact ring, NEW contact ring is held in center position with shipping lock pin. DO NOT remove lock pin until contact ring is attached to steering wheel.
- Install contact ring and reinstall screws holding ring to wheel hub. Pinch ends of locking pin with a pliers and remove. Activate air bag system. See DISABLING & ACTIVATING AIR BAG SYSTEM .