1.0 General Information on Gear Lubricants
WARNING: This page does not describe the selected car, but rather 259 other vehicles, including the 2006 BMW Z4, 2006 BMW X5, 2006 BMW X3, 2006 BMW M6, and 2006 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
Gear lubricants for manual transmissions must conform to the following requirements due to the different transmission designs with considerable variation in loads, temperature and speeds.
The qualities of a recommended gear lubricant are:
- Load carrying capacity, i.e. high-pressure resistance.
- Noise reduction.
- Non-corrosive to various metals.
- Non-foaming.
- Non-separation of additives at operating temperatures.
- Non-sludge forming.
- Prevention of swelling, hardening and shrinking of seals.
These properties are already provided in manual transmission oil by:
- High-pressure additives.
- Corrosion inhibitors.
- Oxidation inhibitors (inhibitors which limit or prevent chemical reactions).
- Anti-foaming agents.