51 34 000 Removing and installing/replacing window crank, rear left or right

WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2006 BMW 325Ci, 2005 BMW 325xi, 2005 BMW 325i, 2005 BMW 325Ci, and 2004 BMW 325xi. However, it is still accessible from the selected car via links, so may be relevant.

Remove plate (1).

Fig 1: Removing Plate

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Guide (1) and catch (2) if finisher (3) must not be damaged.
If necessary, replace faulty finisher (3).

Fig 2: Identifying Finisher

Courtesy of BMW OF NORTH AMERICA, INC.

Unscrew bolt (1).

Remove window crank (2) and rosette (3).

Fig 3: Removing Window Crank And Rosette

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Fit window crank (2) in this position with door window glass closed.

Installation:

Insert rosette (1) with turning lock (2) in opening (3) of door trim panel.

Fig 4: Inserting Rosette With Turning Lock In Opening Of Door Trim Panel
Courtesy of BMW OF NORTH AMERICA, INC.