51 11 Front Bumper
WARNING: This page does not describe the selected car, but rather 38 other vehicles, including the 2006 BMW M3, 2006 BMW 330Ci, 2006 BMW 325Ci, 2005 BMW M3, and 2005 BMW 330xi. However, it is still accessible from the selected car via links, so may be relevant.
FRONT BUMPER TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Bumper to bracket | E32 | M6 | 9Nm | |
| E36 | M8 | 22 Nm | ||
| E34 | M10 | 43 Nm | ||
| 2AZ Bumper and bracket to impact absorber | E31 | M10 | Install bolts with bolt cement. | 22 Nm |
| E38 / E39 / E46 | M10 | 41 Nm | ||
| E36 | M10 | Install bolts with bolt cement. | 55 Nm | |
| E32 / E34 / E30 / Mod. 88 | M12 | 48 Nm | ||
| 3AZ Impact absorber/bracket to body | E30 / E24 | 23 Nm | ||
| E31 / E32 / E34 / E36 / E38 / E39 | M6 | 9 Nm | ||
| E32 / E34 | M10 | 48 Nm | ||
| E46 | M8 | 20 Nm | ||
| 4AZ Carrier to body | E46 / E65 / E66 / E67 | M8 | 18 Nm | |
| E87 / E90 / E91 | M8 | 20 Nm | ||
| E60 / E61 / E63/E64 | M8 | 21.4 Nm | ||
| 5AZ Carrier to deformation element | E85 | M10 | 38 Nm | |
| E83 | M8 | 28 Nm | ||
| 6AZ Deformation element to body | E85 | M8 | 19 Nm | |
| E83 | M8 | 21.4Nm | ||
| 7AZ License plate to bumper | E60 / E63 / E64 | 1 Nm | ||
| 8AZ License plate to bumper (thread repair) | E60 / E63 / E64 | M5 | 4.5 Nm |