24 00 Transmission in general
WARNING: This page does not describe the selected car, but rather 38 other vehicles, including the 2006 BMW M3, 2006 BMW 330Ci, 2006 BMW 325Ci, 2005 BMW M3, and 2005 BMW 330xi. However, it is still accessible from the selected car via links, so may be relevant.
TRANSMISSION TIGHTENING TORQUE SPECIFICATIONS (GENERAL)
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Transmission to engine. Hex screws | All | M8 | 24 Nm | |
| Hex screws | All | M10 | 45 Nm | |
| Hex screws | All | M12 | 82 Nm | |
| Torx bolts | All | M8 | 21 Nm | |
| Torx bolts | All | M10 | 42 Nm | |
| Torx bolts | All | M12 | 72 Nm | |
| Torx bolts | GA6HP19Z | M6 | 9 Nm | |
| Torx bolts | GA6HP19Z | M8 | 22 Nm | |
| Torx bolts | GA6HP19Z | M12 | 73 Nm | |
| Torx screws steel N52 | GA6HP19Z | M8 | 19 Nm | |
| Torx screws steel N52 | GA6HP19Z | M12 | 66 Nm | |
| 2AZ Transmission to N52 engine Aluminium screws are marked blue | GA6HP19Z | Replace screws Jointing torque and angle of rotation must be observed without fail | ||
| GA6HP19Z | M10x30 | Jointing torque | 20 Nm | |
| Torque angle | 90-110° | |||
| GA6HP19Z | M10x85 | Jointing torque | 20 Nm | |
| Torque angle | 180-200° | |||
| GA6HP19Z | M12 | Jointing torque | 34 Nm | |
| Torque angle | 90-110° | |||
| 3AZ Reinforcement shell to transmission/extension | All | M8 | 23 Nm |