24 21 Input, Intermediate and Output Shafts
WARNING: This page does not describe the selected car, but rather 38 other vehicles, including the 2006 BMW M3, 2006 BMW 330Ci, 2006 BMW 325Ci, 2005 BMW M3, and 2005 BMW 330xi. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONSINPUT, INTERMEDIATE AND OUTPUT SHAFTS TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Flange nut, output flange | A5S 300J | 225 Nm | ||
| Flange nut, output flange without spring washer | A5S 360R | 30 Nm | ||
| Flange nut, output flange, with spring washer | A5S 360R / 390R, A4S 200R | 60 Nm | ||
| All/others | 100 Nm |